The first cell is heated and the products of combustion are led into the second cell where they give up part of their heat to the contained ore, so that by the time the first cell is exhausted the mass in the second cell is at a sufficiently high temperature to ignite spontaneously when air is admitted.
Fletcher, in which the blast is heated by passing through a copper coil heated by a separate burner, is only of service when a pointed flame of a fairly high temperature is required.
In area, is on the east coast of the island, almost directly on the equator, and has a very uniform and' high temperature and a very high rainfall.
In reverberatory and air furnaces used in the different operations of iron manufacture, where an extremely high temperature has to be maintained in spaces of comparatively small extent, such as the beds of puddling, welding and steel-melting furnaces, the temperature of the exhaust gases is exceedingly high, and if allowed to pass directly into the chimney they appear as a great body of flame at the top. It is now general to save a portion of this heat by passing the flame through flues of steam boilers, air-heating apparatus, or both - so that the steam required for the necessary operations of the forge and heated blast for the furnace itself may be obtained without further expenditure of fuel.
The sulphate, Ce2(S04) 3, is formed on dissolving the carbonate in sulphuric acid, or on dissolving the basic sulphate in sulphuric acid, in the presence of sulphur dioxide, evaporating the solution, and drying the product obtained, at high temperature (B.
It is probable that most, if not all, the metabolic changes which take place in a cell, such as the transformation of starch, proteids, sugar, cellulose; and the decomposition -of numerous other organic substances which would otherwise require a high temperature or powerful reagents is also due to their activity.
It forms a yellowishwhite deliquescent mass, which melts on heating, and at a sufficiently high temperature it yields a dark red liquid.
GALVANIZED IRON, sheet iron having its surface covered with a thin coating of zinc. In spite of the name, galvanic action has often no part in the production of galvanized iron, which is prepared by dipping the iron, properly cleaned and pickled in acid, in a bath of molten zinc. The hotter the zinc the thinner the coating, but as a high temperature of the bath is attended with certain objections, it is a common practice to use a moderate temperature and clear off the excess of zinc by passing the plates between rollers.
Various applications of the same system are in use, but the most popular is to place the leaves on trays of wire network in a high temperature for about twenty minutes, after which they are firm and crisp. Up to this point of the manufacture the leaf has been in the stalk, the leaves and bud being unseparated.
It dissociates when heated to a high temperature and is not affected by oxygen.